Monster Factory Chapter 748: : Manufacturing Metal Dysprosium

anomaly is low-key during the pick-up process.

After the two Ilyushin IL-76s landed at the airport, they were pulled into the exclusive hangar of Monster Industries by towing vehicles.

Then the Cabin Room tailgate opened, and two Juli hard workers drove a large forklift, one by one, the coffin-like lead cabinets were transferred to the container Heavy Truck.

A few hours later, these lead cabinets went to Dragon Creek Beach Factory.

In the underground base, a very highly industrialized rare metal refining Factory has been established, but the scale is small, with a daily production capacity of about 100 tons.

This is because when the construction of Factory in the Sotu rainforest is completed, the metal refining work will be carried out there.

By then, it will be transported directly to the place by air, which will be High-Purity silver-white Metal Dysprosium.

In the highly clean and sealed underground Factory, Ye Qing is wearing protective clothing, standing aside with great excitement, watching Juli's hard work cut open the lead cabinets and take out piles of gray-brown metal from the inside. ingot.

These are raw materials with metal purity of 80% and Dysprosium content of about 8%.

In front of Ye Qing, there are silver-white metal tube-shaped industrial device. At the end of these device, there are a large number of reactors, and a immense metal melting furnace.

They are refine device, and Juli has already begun to transport these metal ingot materials, put them in a vacuum arc furnace, and perform the first smelting work.

The extraction method of rare earth metal ore is both simple and complicated.

Simply speaking, it is as simple as that some criminals secretly organize manpower to steal mines. Only need to drill dense deep holes in the mine, and then inject specific chemical substances into these deep holes, it can react with the rare earth ore and make the internal metal elements oxidized and dissolved. These solutions are then drawn up from the deep hole and poured into the tank for further processing.

How to deal with it?

It is roughly divided into three categories, acid method, alkali method and chlorination decomposition. The extracted solution contains a large amount of rare metal elements. Using the principle of chemical change, they are reduced to crystalloid, and finally the crystalloid is pulverized to obtain a saleable rare earth metal raw material.

Why the illegal mining of rare earths in my country has been repeatedly prohibited? It is because of these large-scale chemical raw materials that can be purchased at will, rare earth metal raw materials can be extracted from raw ore.

These raw materials are piled in the shed like flour, and each bag of smuggled out can sell for tens of thousands of yuan.

But this method seriously damages the natural environment. Usually a hill is drilled with holes and liquid chemicals are injected into it, and the vegetation of the whole hill will wither.

The chemical reduction process of the extracted solution requires a lot of water resources. The criminals directly discharged the polluted water after use into lakes and rivers, and the only result was the large-scale death of aquatic organisms.

This is the simple refine method.

The complex refine method is the one being used in Dragon Creek Beach Factory.

Juli Hardworking takes the previous mini Factory, through grinding and magnetic separation, and finally die-casting the raw materials into ingots, into the vacuum furnace, heating to 3000 500 Degrees, and gasifying all the metal substances inside. Then these metal gases are directly introduced into the centrifuge, and relying on the gas centrifugation method, refine further separates different metal molecules in the metal gas.

Gas centrifuge, just these three simple words.

On the represented industrial field, an insurmountable height.

Because of this method, we can master concentrated Uranium-235 from refine from uranium ore.

Originally, Ye Qing can use choice's cheaper chemical reaction refine technology. With Strong Ionization Waste Water Processing system, Ye Qing can avoid any water pollution problems. However, gas centrifugation can not only be used to separate various single metal molecules in these rare metal. It can also lay the foundation of refine for the calcium uranium mica minerals mined in the mining area.

Ye Qing does not plan to build an atomic bomb. To build an atomic bomb requires tens of thousands of centrifuges to work in parallel.

But energy towers need to invest in materials to generate more energy, and concentrated Uranium-235 is the best material currently available.

Using the energy tower to power the centrifuge. When the gas centrifuge was turned on, Ye Qing, standing in the workshop, suddenly felt that a high-power vibrating machine was connected between the world and the earth, and a machine was stuffed in his mind, including blood. All are vibrating rapidly.

There are hundreds of centrifuges in front of me, and each centrifuge rotates at 100,000 revolutions per minute.

What is this concept?

There are a lot of Exceed Grade sports cars on the market that are known to be able to blow up the street. The maximum engine speed per minute can reach 10,000, even if it is the sky. Under the condition of 10,000 rpm, it can be maintained for more than five minutes as a miracle.

At present, these centrifuges are 100,000 revolutions, and this is its normal working speed, and it must be maintained for more than one day.

However, under the condition of 100,000 revolutions per minute, there are hundreds of centrifuges in front of Ye Qing. From the naked eye, there is no jitter, even the shell resonance phenomenon.

This shows that the balance of the spindles of these centrifuges has reached an incredible technical level. And the noise around Ye Qing was not the mechanical roar of an engine, but every molecule in the air was shaking.

In front of these industrial device, what is even 10,000 supercars?

Can a supercar engine use a magnetic bearing without any physical contact? The supercar engine main shaft can achieve near perfect straightness. The internal crystalloid structure is neatly arranged. Even if it is cut into hundreds of pieces, the weight error of each cut does not exceed one hair strand, which is 0.5 thousandths of a gram. weight?

It can’t be done. The centrifuges in front of Ye Qing’s eyes have higher technical content than those used to separate Uranium-235 in those big countries. This is also the reason why Ye Qing choice is hidden in the underground base. Outside Factory has a set of chemical refine device then it will be alright that will produce a lot of chemically polluted water.

After staying in the sealed Factory for less than two minutes, Ye Qing ran out in sweat~IndoMTL.com~ Although the industrial power was shocked, but manpower cannot be violated.

But the final refine result of the centrifuge, Ye Qing can be observed through another device.

device's name is Gas Settling Chamber, which varies according to the weight of the metal molecule. The centrifuge can separate the heaviest metal in turn. For example, scandium, lanthanum, cerium, Dysprosium, these metal densities are different, also created a different molecular weight of metal.

The gas centrifuges used by major countries can separate Uranium-235 and 238 from uranium.

Know that Uranium-235 is only 1.6% lighter than 238, but under the high-speed rotation of the centrifuge, the slightly heavier 238 will be thrown to the periphery, not to mention the rare earth metal element with a larger molecular weight.

At nine o'clock in the evening, in the underground base of Factory, the metal elements separated for the third time slowly gathered in the settlement chamber.

These shiny silver gases, after cooling, are sprayed directly on the transparent glass substrate of one layer, slowly accumulating like snow.

It didn't take long for a piece of Metal Dysprosium weighing a ton to appear quietly in front of Ye Qing.