Monster Factory: One thousand one hundred and sixty-seven: Flawless diamond material
When a diamond arrives in the hands of a jeweler, it is a gimmick treasure labeled "diamonds forever", which can drain a man's pockets.
But in fact, apart from the "jewelry" attribute, diamonds have few other uses.
In terms of industrial technology, natural diamonds are rarely used.
Because almost all the places where it needs to appear, it is replaced by artificially synthesized Diamond.
The industrial technology of using high-energy laser to vaporize diamonds and vapor-deposit it on the display. The Monster industry is regarded as the first, and it is also regarded as the industrial use of diamond raw ore to find a new job.
Different from the previous technology of coating on Dream Monitor, the permeability of the coating after the rough diamond is vaporized is enough for Dream Monitor to obtain sufficiently excellent imaging effects.
The imaging lens body of holographic glasses is only the size of a matchbox. If you want to use a matchbox-sized imaging lens to make customer(s) obtain the same viewing angle as in the real world, the coating technology must be improved and further improved.
From the smallest to the largest of 10 million times, and ensure that no fuzzy pixels exist in customer(s).
This can only be guaranteed if the lens body is made transparent and flawless so that the naked eye cannot observe its existence.
"We need diamonds of higher purity, so as to save more time for refine after gasification." Master Craftsman shrugged his thin shoulders and handed the rough diamond information currently in Factory inventory to Ye Qing. The number of super High-Purity rough diamonds supplied by Nicaya is far from enough."
"Boss, we must find more sources of supply."
"Are you asking me to start a jeweler's sideline?" After reading the diamond raw ore data in Factory, Ye Qing suddenly felt dizzy.
There are a lot of rough diamonds in stock, but among these rough diamonds, WS1 rough diamonds belonging to the third Standard grade are only less than 300 grams.
As long as all gem minerals are attached with commercial attributes, the pure degree is often the most fundamental element that determines its commercial value.
Things are precious. pure gems are very scarce in nature.
Same as beautiful jade, jade, and gems.
Rough diamonds of the same size are often distinguished by their pure degree. The more pure diamonds are, the more they can win people's hearts, and the rarer they are.
The International Diamond Agency grades diamonds Standard into eleven pure grades.
Diamonds below the SI2 grade basically have no commercial circulation value. Their purpose is only to act as diamond abrasives.
SI2 grade diamond means that there are small other mineral impurities inside this diamond, which is only suitable for polishing into crushed diamond for jewelry decoration.
The rough diamond grades for squeezing men's pockets are often in the four grades of VS2, VS1, WS2, and WS1.
For diamonds of these grades, other mineral defects inside can only be found through a high-power magnifying glass. These rough diamonds are cut and polished to make a diamond ring, which can show a dazzling colorful luster under light.
It is these colorful lusters that have fascinated the hearts of many beautiful women.
Further up, there is an IF level suitable for making precious jewelry.
The Standard limit of diamond pure degree is FL level.
The highest grade, also known as a flawless diamond. It means that even under a super-high magnification magnifying glass, the inside of this diamond is flawless, without any mineral impurities.
In the past, the diamond raw materials imported by Monster industry from Nigeria were all high-quality diamond raw materials above WS2.
These fine diamond raw materials, even under the careful screening of a ten times magnifying glass, it is difficult to find the internal mineral flaws.
Use this diamond material to coat Dream Monitor, which can be used directly.
Now coating holographic glasses, even WS1 grade is not qualified. The minimum Standard, but also the second IF level in the pure ranking list. And before coating, it must be refine to remove all other mineral impurities even at nanometer level.
The cruelty and extreme nature of industry is often reflected in these seemingly trivial details.
Coating the lens body of holographic glasses, even if a nano-scale mineral defect of merely is plated on the surface of the lens body.
When the customer(s) wears the holographic glasses to experience the virtual world with a 180-degree perspective, the flaw will be magnified tens of thousands of times and become a visual stain of a few tenths of a millimeter.
Perhaps a stain of a few tenths of a millimeter will not affect the visual experience of customer(s).
But who can do that, fortunately, there is only one flaw on a mirror body?
This kind of probability is lower than that of the 100 million yuan prize.
If the refine Standard is slightly relaxed, it will undoubtedly save a lot of refine process and also reduce the rough diamond grade to WS1.
But if you do this, the surface of an original pure mirror body that is flawless will be covered with sheets of nano-scale mineral impurities.
When customer(s) wears this kind of glasses to experience the virtual world, there will be slight chromatic aberration, and a piece of fuzzy visual spots that are not obvious but lingering.
In terms of the efficiency of processing, only the second IF grade rough diamond of rank can be qualified as the coating material for holographic glasses.
However, the current situation is that fine diamond raw materials above WS2 are already scarce.
Now even if Nigeria’s General Mopu controls the entire Western Territory, the three diamond mine’s daily output of IF grade rough diamonds in the territory is less than 30 grams.
Not to mention the FL extreme purity rough diamonds of Morningstar.
The higher the purity, it means that after the diamond raw ore is gasified in a vacuum environment, the further refine consumes less time and less raw material waste.
Because of the scarcity of IF-grade rough diamonds, only Master Craftsman in Factory can be used to carefully mark the internal flaws of WSI-grade diamond raw ore under a high-power microscope. Finally, these flaws are cut and separated from raw ore to obtain fine pieces. Cracked FL grade rough diamond.
This is a meticulous and time-consuming hand-made job. Diamond is the hardest material in the world~ IndoMTL.com~ How easy is it to cut it accurately?
"Boss, I feel that even if it is a sideline business in the jewelry business, it cannot meet our needs."
Master Craftsman is serious, "We need a lot of IF-grade raw ore, preferably FL ultimate purity raw ore. I asked the General Mopu subordinates who are responsible for supplying us, and they said not to mention Nicaya, even the entire Europe diamond jeweler , I don’t have the ability to produce more than 500 grams of IF grade diamond raw ore."
"You can't help me like this."
"Synthetic diamonds are of unusable purity at all."
Ye Qing was a little embarrassed, "As for searching for IF-level raw ore, it is obviously not something that can be solved with money. No, we will expand the purchase of WS1-level diamond raw ore first."
"We can only waste some man-hours and cut these rough diamonds to remove impurities and turn them into crushed diamond with higher purity."
"We can ask those jewelers to hand over the stock of the bottom of the box." Master Craftsman raised its eyebrows, with strong expectations in its eyes. "I heard people say that these jewelers have hidden a lot of WS1 grades in the bank vault. There are a few rough diamonds, even the rough diamonds of FL ultimate purity."
"They stock these rough diamonds to increase the price of the international diamond market. If these stocks are transferred to Factory, the current shortage of raw materials can be alleviated."
"Do you think they will sell?" Ye Qing knew that Master Craftsman far underestimated the greed of capital merchants.
If they know that the Monster industry is in urgent need of a large amount of diamonds raw ore exceeding High-Purity, they will not take advantage of the fire and raise the price of the raw materials several levels.
Master Craftsman chuckled and replied with a different way of thinking from ordinary people, "It's just right, they rushed to the fire and robbed us, so we went the other way, robbed the diamonds and didn't pay."
https://
Genius remembers the address of this site in one second:. cell phone version reading URL: