Age of Adepts Chapter 753: Refined armband
Remember [lnmao.org] in one second, fast update, no popup, free to read!
Within the magic room.
Bright, unglaring, pure white magic lights illuminate every corner here.
In front of a precise and complete Advanced Level Alchemy platform, Grim is carefully pouring the molten liquid fire-hardened refined iron from the magic crucible into a metal mold. When they were in the semi-condensed status/mode, they picked up the carving knife and carefully carved a magic pattern and rune lines on it.
This fire-hardened fine iron is the best metal material that Grim can use to make magic arm rings, and its melting point is as high as 9327 degrees. Because their hardness is too high, and magic resistance is extraordinary, Grim can only successfully engrav the groove of flame sorcerer array on it when they are in the semi-fused status/mode.
In addition, in order to avoid the sorcerer array content of the above Adept being quickly parsed, in addition to the normal attacks sorcerer array, Jeneng array and auxiliary rune, Grim also needs to add some decorative patterns and lines to the entire sorcerer array system. Disguise the original function.
And all of this must be done while the liquid fire anorectic iron is in the semi-condensing status/mode.
Grim estimated that this set of arm ring molds takes about 210 seconds from pouring to full condensation. During this time, Grim must complete 13 attacks sorcerer array, 25 energy-gathering array and 421 auxiliary rune, and engraving of 74 magic patterns.
It is difficult to imagine how much content is micro-engraved on a metal arm ring with a diameter of 70 cm and a width of about 30 cm. And more importantly, the entire process must be done in one go without any pause in the middle. Otherwise, once the fire-hardened iron cools down, even if you use enchanted's "Magic Sword" and "Armor Sundering" magic knife, you may not want to cut any more on it.
"The temperature of magic flame is reduced by 7 degrees ..."
Grim divided a little Spirit and linked it to the central control crystal of the Alchemy platform. It lowered the magic flame up to 9800 degrees by 7 degrees.
"Auxiliary sorcerer array starts ..."
Grim has another Spirit, and adjusted the Alchemy settings according to the instructions of the chip.
"The enchantment of magic knife is completed ..."
After activating the sharp and armor-breaking effects on the magic knife with Spiritual Force, the Grim then gently engraved the knife tip on the surface of the semi-melted arm ring with an amazing remaining temperature under the instructions of the chip. With the slight movement of the wrist and the flexible control of the fingers, the hard magic carving knife exuding a yellow light began to move and turn slightly on the surface of the armband.
The lines and grooves carved by it are thin mosquito wires, but dense and continuous. For an ordinary person, if you do n’t use a high magnification magnifying glass, you ca n’t even see it clearly, but Grim often needs to engrav a complete three-dimensional sorcerer array in a rice grain-sized area.
In order to complete this difficult task, the Grim black eye pupils are blue and bright like stars, and they have used the scanning and magnification functions of the chip to the extreme.
The surface of the armband, which was only 30 cm wide, was magnified 3,000 times by the chip. In the eyes of Grim, it is wide enough to allow him to play freely on it. However, correspondingly, the magic knife with a thin blade like cicada's wings, at the moment, looks like a thick stone pillar and looks clumsy and abnormal.
Grim controls the magic knife with his flexible fingers and wrists, allowing it to quickly move around the surface of the armband according to the blue lines indicated by the chip. In this process, the force of Grim's wrists and fingers must be consistent, otherwise the grooves of the lines drawn by the knife will be different, which will greatly affect the function and effect of the finished products in the future.
However, at the moment, the underarm of the armband is still under the terrible high temperature of six or seven thousand degrees. To touch and control the armband at such a close distance, the wrong Grim is a Second Grade Fire Sorcerer. I am afraid it is difficult to stick to it.
Due to the magical properties of the fire hate iron, it has outstanding resistance to laser, which makes Grim can only choose to manually draw. Fortunately, with the experience of etching Magic Puppet Crystal Core in the past hundred years, Grim has completed his own work without surprise.
With a sigh of relief, Grim carefully held the semi-finished product in the left hand, and picked up a fluffy golden yellow quartz sand powder on the right side of the armband and spread it on the surface of the armband. With the flash of golden light, most of the quartz sand was absorbed by the arm ring, and began to make its surface yellow and clear, which looked unusually dazzling.
Quartz sand is a more commonly used energy-gathering material in the production of Sorcerer Artifact, and it can also be perfectly blended with fire-hard refined iron, and there will be no element repulsion effect.
After all this is done, Grim can safely browse the Flame Armband semi-finished products in hand. Yes, this is not the final form of Second Grade Sorcerer Artifact Flame Armband, but just a semi-finished product.
This is an exquisite armband made of dark red fire-resistant fine iron as the basic material. The energy-absorbing substance immersed in it echoes with the free elementium in the environment, so that it has a faint layer outside and outside Brilliant red light film.
Its exquisite shape and appearance is the final solution determined after the chip has referred to tens of thousands of Sorcerer Artifacts of the same type, and the complicated sorcerer array engraved on it has been optimized and adjusted hundreds or thousands of times.
Looking at this exquisite work of art, Grim's's eyes are a little intoxicated!
After playing with it for a long time, Grim reluctantly placed it on the velvet tablecloth of the Alchemy experimental bench.
The Flame Armband bottom tire has been completed. In the future, you only need to completely melt the superb fire agate and insert it into the dense grooves on the surface of the arm ring by special methods. Of course, before that, you need to prepare those fire dragon blood into a suitable neutralizer in advance, which is also a time-consuming task!
I made a preliminary estimate. If I want to complete Flame Armband as soon as possible, I have to work hard for at least one month. After the last expedition, Grim fully understood. Only equipped with the two sets of Flame Throne, can he be more confident in exploring Fire Elemental Plane.
While calculating the daily schedule for the coming month, Grim rubbed his forehead gently with his hands, and a tingling came from his head.
Although the refining process only lasted for 210 seconds, it made him Spirit highly nervous, and the work of refining the arm ring sole was quite detrimental to Spirit. So at this moment, once Grim relaxes, Spirit becomes a bit tired.
Wave off magic flame on Alchemy, cut off Magic Tower's magical energy supply to Alchemy, and ignore the messy Alchemy item and utensils. Grim yawned and rubbed his eyes to get out of alchemy lab.
It's time to take a good rest!
…………
Anhinga Cliffs.
The afternoon sun shines through the lush foliage on the grass under the cliff.
Three snakebird cubs are playing in the green grass, while the other two snakebird cubs are weary in a grassy nest, and the beautiful crickets are asleep.
Most of the adult snakes and beasts have gone out to look for food. Only two female beasts remain on the high cliff to guard the nest. They loung lazily inside the cliff walls and caves, basking in the sun, occasionally poking out their heads to look at the cubs at the bottom of the cliff.
And at the corner of the innermost cave wall behind them, seven or eight white snakebird eggs with a little yellow spots covered the whole grassy nest, and some clean animal bones were scattered around.
The cliff is a hunting area for snakes and beasts within seven to eighty miles. Those overly fierce beasts or monster have been expelled farther by them. So even if most of the adult snake birds and beasts have gone out to hunt, the two left-behind female animals still have no worries about the safety of this snake bird cliff.
"Good opportunity ... good opportunity ..."
Pick out the wormwood that is standing in front of you. The apprentice thieves of the Light of the Shadow Team peer into this peaceful and peaceful world, and their hearts are bubbling.
The adult male snake bird and beast are not there. There are only two female beasts in the house. This is really good news.
Waiting for two days nearby, the apprentice team that finally found this opportunity immediately started without hesitation.
Gomo Gomo Gomo Gomo ...
With a strange sound of metal, a metal chick emerged from the Black Forest in a stiff step, appearing on this half-mile-long green pasture.
Three playful snakebird cubs were immediately attracted attention, stopped chasing, and his lower body looked curiously at this weird guy he had never seen.
In it, the little ones didn't feel the danger and terrible breath, so they didn't escape to the nest immediately.
The metal chick flapped on the metal wings, shaking Jin Chancan's body, strolled around the edge of the grass, then suddenly screamed and turned back to escape into the Black Forest.
The three young cubs killed by the cool joy immediately clawed with thin wings and chased after them.
Three big and one small, so quickly disappeared into the Black Forest ...
After a moment, a female animal resting at the mouth of the cliff's nest points out the snake-like head again. This time it was startled, and found in horror that the three cubs were missing from the grass.
The female immediately raised her neck and screamed. In the bizarre scream, there were the crispness of the bird creature and the hissing noise of snake-type creature.
The sharp sizzle echoed for a long time near Gao Ya.
The next moment, two snakebird females flew out of the nest, and began to hover around the snakebird's cliff, flying high and low, anxiously looking for the missing three young cubs.
The two dormant cubs woke up and fled back to their nest in panic.
The two female beasts fell on the grass, and the red snake tongue was constantly swallowing in the snake-like skull. Soon, the whereabouts of the three cubs were detected in the air.
After a spiky exchange between the two females, one rushed back to the lair to stay, and the other rose to the sky, chasing away in the direction of the cub's scent dissipating.