I Can View Character Attributes Chapter 388: Thermal knife
The design plan of the graphene combat suit was finalized, and soon the research and development work of the Xinghai scientific research team also entered the right track.
With the support of Xia Xu, the super-gold master, everyone does not need to support funds and equipment at all, and Xinghai Industry will naturally be responsible for the negotiation and procurement of the necessary graphene and carbon sponge.
Without the trivial clutter, a group of geniuses gathered together and burst into powerful creativity. The entire research and development progress was astonishingly fast, and Xia Xu benefited a lot from the exchange and collision of different ideas.
And a week later, the haite alloy he bought from the dark web has also been delivered.
He originally thought there would be a more confidential transaction method, and even thought about whether there would be some bullshit, but it actually made him a little bit dumbfounded, this thing turned out to be delivered by courier.
But think about it, it's right, after all, it's just a piece of alloy, and it's not an illegal item. Naturally, there's no need to do things that don't exist.
"Xia, what are you holding?"
Walker and others, who were immersed in studying the graphene suits, saw Xia Xu came in with a courier box, and glanced around curiously.
"Good stuff, but keep it a secret for now."
Xia Xu smiled mysteriously, and went straight into a spare studio without discussing it with Walker and the others.
Zhou Ji and Walker are busy researching graphene combat suits, which is the most important thing, so Haite Alloy will not let them distract them for the time being.
And he has already made plans for how to use Haite alloy. This alloy is very suitable for making thermal weapons. He intends to use this thing to make a knife that can perform high temperature cutting.
This kind of weapon is not technically difficult. To put it bluntly, it is just heating the metal. The difficulty is mainly focused on materials and energy. There is no need to use Walker and the others, just to exercise their hands-on ability. .
"Sure enough, some kind of alloy with tungsten as the main component..."
The first thing Xia Xu did after he came back with Hite alloy was to test the composition of this sky-high alloy.
As he expected, it was a tungsten alloy dominated by tungsten.
He actually guessed this for a long time. After all, the properties of Haite alloy are actually highly overlapped with those of tungsten metal, but there are no defects such as tungsten being easily oxidized, and some physical properties are also better.
However, it is unrealistic to try to copy just by knowing the main ingredients.
Even if only a small amount of different components are added to the alloy, it will have a huge impact on the performance. It is impossible to fully understand its composition, and it is impossible to confirm the specific proportion and processing technology.
Of course, Xia Xu didn't have any thoughts on this aspect. The main purpose of the test is to confirm the guess and grasp the actual material properties.
After a little understanding, Xia Xu began to draw design drawings after confirming that the previous description of the properties was genuine, and sent the Haite alloy to a foundry under Xinghai Industry for processing.
The hardness and melting point of this thing are too high. The equipment on the research team's side will not be able to get Hite alloy. The National Science and Technology University has no shortage of high-end equipment, but it is impossible to build a foundry in the school.
Haite alloy is used to make the blade, in fact, it is forged and shaped. There is nothing to say about this.
The core part of the thermal knife is the heating component, which is actually not too difficult. Basically, direct electricity can make the Hite alloy heat up and generate heat.
Of course, this is just a description, it can't be so rude, for the speed and power consumption, it is still necessary to carefully design the circuit to control the current and voltage, and arrange it reasonably on the hilt.
And the thermal knife actually has a fatal difficulty - energy.
Accurately, miniaturized energy.
The battery technology of today's human beings is actually very developed. A shoebox-sized battery is enough to support battery cars and electric vehicles to run hundreds of kilometers.
However, the reality is that energy is still unavoidable in many aspects today, especially when it comes to miniaturized energy.
The energy problem of the thermal knife is actually very simple to solve. You only need to bring a small backpack, carry the battery on your back, and connect it to the end of the hilt to easily meet the energy consumption needs.
You have to carry a battery pack at all times and keep the wires connected to the hilt. This design is too stupid. Let's not talk about the fact that people unplug your wires in actual combat.
Xia Xu didn't even think about it, and immediately ruled out this plan.
However, the energy problem still needs to be faced.
Since the energy cannot be satisfied, it can only sacrifice battery life helplessly.
Fortunately, the thermal knife he designed is in the shape of a seedling knife that he is most used to. The bare handle is forty centimeters. If the width is slightly increased, there will still be a lot of internal space.
The 40cm knife handle is made of hollow titanium alloy, which contains all batteries and circuits except a small amount of insulation and the front insulation.
In this way, I don't dare to say more, at least two or three minutes is more than enough. After all, it takes a process for the Hite alloy to cool down after being heated to two or three thousand degrees.
"Although the battery life data on paper is a bit poor, the two or three minutes at the critical moment are actually enough to support a battle..."
Xia Xu, who finally finalized the design, consoled himself.
Two or three minutes, in most cases, is actually enough to deal with a battle~IndoMTL.com~ Unless you are besieged by a lot of people at close range, there are very few people who can cut down with people for two or three minutes in reality. Happening.
And it's just that the high temperature can only last for three minutes. Without the high temperature, it is not impossible to kill people. With the strength and weight of the Haite alloy, it can become a fighting weapon even without high temperature.
It's just the truth. Seeing that his work has such flaws, Xia Xu can't help but feel a little regretful.
"Victor may actually have miniaturized high-energy battery technology there, and if not, it should be easy for him to get it out..."
Unfortunately, such a thought inevitably flashed past, and was quickly forgotten by Xia Xu.
It's impossible to find Victor. If he really wants to open this mouth, no matter what method he uses, he can already imagine the arrogant appearance of that stinky and saucy bag.
The Arachnid Predator can be criticized for just using the commercialized components of the SPOT Group, which is not known in the past.
Abandoning this thought, Xia Xu, who had the design drawing, entered the manufacturing process.
He doesn't need to worry about the blade, he can solve it at his own foundry, and the hilt is also simple. There are laser 3D metal printers in the laboratory building that can be borrowed.
This instrument is different from 3D printers made of plastic materials. Its principle is to fill it with a large amount of metal powder, and then use the laser to accurately fuse and solidify the metal powder, so as to 'wither' the corresponding metal parts. When the parts come out, even titanium alloys can still be printed.
It only took half a day of work, and a silver-white hilt made of titanium alloy with highly technical texture flutes was newly released, and then the battery pack, circuit, and blade sent from the foundry...
If you like, I can view character attributes, please collect it: () I can view character attributes. The update speed of literature written by me is the fastest on the entire network.