Magus Tech Chapter 572: Spell chip! (Science direction, research direction, if you don’t like it, you can jump…

A few days later.

Inside the Garden of Eden, the main laboratory.

On the table in the main laboratory were the design drawings of the "Gloves of Extermination" and the scroll of the "Right Hand of God" that had been transcribed not long ago. Li Cha sat at the table and squinted at it.

In a short period of time, no further clues about "Artis" could be found, so Richard temporarily set his goal on the production of "Gloves of Destroyer", planning to try to study it seriously. If ideal, it would be even better to be able to make a prototype of the blueprint.

Of course, this is very difficult.

"Gloves of Extermination" is indeed a magical spell item, but compared with other magic pattern spell items, it is not an order of magnitude more complicated. According to the previous statement, the magic pattern on the ordinary magic pattern props is like a circuit diagram with anti-counterfeiting means, and it needs certain means to decipher and use it. And the magic patterns involved in the "gloves of extermination" are more like chips.

Yes, chip!

Of course, this is just a metaphor, not to say that the "Glove of Destruction" really needs a chip, but the difficulty is similar.

Speaking of chips, this is almost one of the most representative products of high-end technology on the planet.

A chip that can be held in the palm of your hand, with a size of one square centimeter or even smaller, can integrate billions of transistors, complete trillions of calculations in a second, and simulate a fictional world between square inches, or It is almost unimaginable to calculate all the possible development results of one thing before putting it on.

And if the chip is viewed in the current wizarding world similar to the Middle Ages, it is equivalent to a flawless illusion, or an all-knowing prophecy spell.

Of course, the ability of the chip to be so powerful did not happen overnight. It became like this after a long road of development. .

Before the most basic chip, that is, the transistor, electron tubes were widely used on the earth.

The first computer, the Atanasoff Berry Computer, was born in the United States in 1942. It covered an area of ​​150 square meters and weighed 30 tons. It used 17,468 electronic tubes, 7,200 resistors, 10,000 capacitors, 50 If it is a machine, it is better to say it is a building, which cannot be moved, let alone used.

Because of its obvious disadvantages, scientists have devoted a lot of energy since then to trying to develop a new, lighter computer.

So...

In 1947, the first semiconductor transistor was produced.

In 1950, the junction transistor was born

In 1958, the integrated circuit was invented.

In 1960, the photolithography process was invented.

In 1963, CMOS technology was proposed, after which most integrated circuit chips are based on this technology.

In 1964, Moore's Law was proposed, predicting that the integration of transistors would double every 18 months, and integrated circuits began to enter a stage of rapid development.

In 1971, large-scale integrated circuits appeared.

In 1978, VLSI appeared, and 140,000 transistors were integrated on a silicon chip less than 0.5 square centimeters.

In 1988, VLSI was further improved, and 35 million transistors were integrated on a silicon chip of 1 square centimeter.

In 1989, the transistor integration process in the chip reached the 1μm level, that is, 0.0001cm.

In 2001, the transistor integration process in the chip reached the 0.13μm level.

In 2003, the transistor integration process in the chip reached 90nm process, that is, 0.000009cm.

In 2018, the transistor integration process in the chip reached the 7nm process, and the integrated transistors reached tens of trillions.

In this way, the chip has gradually become the most cutting-edge product of technology.

On the earth, chips are a very typical knowledge-intensive and capital-intensive industry, which can only be supported by super attacks or countries.

Not to mention anything else, the general price of the lithography machine, which is necessary for making chips, is around 1 billion yuan, and the entire set of equipment needs more than ten Boeing 747 sorties to complete the transportation.

And this is just a lithography machine. To make chips, the lithography machine alone is not enough, and countless instruments and equipment are needed to form a complete production line.

Outside the pipeline, more research work is put into it.

Without investing an astronomical amount of money, the chip industry will not produce results.

And the result does not mean success, because if the quality of the produced chip is lower than that of the top chip, it will not have enough market. Even if such inferior chips are sold cheaply, not to mention whether consumers will buy them, it is a huge problem just to sell how much to recover the cost and how much to sell to obtain funds to research the next generation of chips.

Therefore, once the chip technology falls behind, it is not possible to catch up with just a few people shouting slogans and working hard. It requires countless capital investment, spare no effort to support, and more than ten years or even decades of waiting before we can see the dawn of success.

This is the most important weapon of the country!

Now, of course, Li Cha is not planning to make chips. Although he knows a lot of knowledge, but breaking away from the productivity of the current world, trying to create a high-tech chip production line by himself is not arrogant, it is completely delusional!

But everything can be changed, he can't make a chip on the earth, he doesn't need to make a chip on the earth, and it's useless if he makes it-at least for now.

What he is going to do is to learn from some of the chip making techniques on the earth to complete the depiction of the complex magic patterns on the design drawing of the "Gloves of Extermination".

On the design drawings, the number and complexity of the magic patterns can be said to have surpassed the imagination of ordinary people. Through a special structure, the magic patterns were superimposed on several layers to complete the production of the entire "glove of extermination".

And if it is made with a chip process, it doesn't need to be like this.

After all ~IndoMTL.com~ No matter how complicated the magic pattern is, it is still visible to the naked eye, and the accuracy is above 0.0001cm, which is the level of chip transistor integration technology on the earth in 1989.

As long as his method is reasonable and can play the role imagined, the area of ​​the magic pattern can be greatly reduced, and part or all of the magic pattern of the "Glove of Extinct World" can be carved in a fingernail-sized chip.

Then, it is possible to avoid many difficulties in the process of making the "Gauntlet of Destroyer", and finally produce a finished product - a magic chip with the core at its core, which has never existed in this wizarding world similar to the Middle Ages. Texture spell props.

The chips in it can be called... spell chips.

Well, spell chips.

So what exactly do you want to do?

Li Cha pondered, tapped his fingers on the table, and after a while, he already had a general idea.

If we use some of the technology of the earth chip to make the magic chip, the core technology should be... lithography technology.

And to explain this technology in simple words, it can be simply regarded as... taking pictures.

Yes, take a picture.

In this photography, four things are needed, negative film, paint, mask and light source.

Spread the paint evenly on the negative, let the light source pass through the gaps in the mask, and irradiate the special light on the negative paint. At that time, the light from the light source will react with the paint, and the desired shape will appear.

The so-called shape, on the earth chip, will become a transistor after various subsequent treatments, while on the magic chip, it will be a magic pattern.

So now we need to solve the first thing, negative film.