Monster Factory Chapter 183: : The final process

(I’m not a man. Yesterday I said I didn’t do the third shift. I am guilty. I must make it up as soon as possible.. шщш.㈦㈨ⅹ.сом is updated very quickly. Every month, I will be busy. These few days are really very busy. It’s busy flying. But that’s not a reason.)

…………………………

Two kilometers ~

The first thing Ye Qing thought of was not how efficient this gadget is, it ‘shot’ a radius of 2,000 meters. Purify one place of sewage and then go to another place.

It's how much power this guy has to consume...

When the 110kV power grid was replaced, people with electricity Company had already smiled with eyebrows instead of eyebrows. Since metal smelting center was built, this guy has consumed two million electricity a month. Electricity Company wanted to pull another high-voltage line, let Ye Qing open it up.

The power of strong ionization is greater than metal smelting center.

Energy is conserved, which can affect harmful substances in the water within a range of two kilometers, so sufficient energy must be required.

The bay of Dragon Creek Beach is more than ten square kilometers. The seawater is fluid and the sewage will flow along with it. It is definitely not enough to calculate by the square. It must be purified several times.

For this guy ∟79 Novel Network, m.'s power, Ye Qing estimated that the entire bay was cleaned out by ‘touching’ the entire bay, and the electricity consumed would be enough to buy a Lagonda.

"The cost of tens of millions has been smashed in, and you don't have to worry about ~ if there are more lice," Ye Qing comforted herself.

While the monsters were immersed in manufacturing one by one, Ye Qing drove to Red Star Shipyard.

When the Strong Ionized Waste Processing Device is invested in the in the sea, it must be followed by a ship to collect the harmful substances that it has towed.

With a metal ship, Ye Qing was worried that the ship would be sucked over, so he came here to buy a FRP ship.

Red Star Shipyard is the largest privately owned shipyard in Zhongyun.

When Ye Qing walked along Huanhai Avenue to the northeast of Zhongyun City, he could see the beach side from a long distance away. Two 800-ton-class dragons were erected in the same blue color as the triumphal gate. The'door' hangs.

These big guys are produced by Zhenhua Heavy Industry, and under one of the dragon's door cranes near the sea, there is also a 70,000-ton oil carrier lifting the bridge.

When Ye Qing drove to Red Star Shipyard, the ‘door’ guard just let him go without asking.

Ye Qing parked the car and walked directly into the customer reception room. A young'girl' who was working at the desk quickly got up to greet Ye Qing.

When you do customer sales, your eyes are all equipped with a sweep function. The customer will know how much the costume is worth.

Then she classified Ye Qing into one of the top customers, thinking that this handsome young man came to order a yacht.

The hot tea is ready, and Ye Qing's words completely chilled her heart.

"Girl, you can make a fiberglass boat here in a few days. The size is the hull of ten meters long and three wide, without motors and roofs." Ye Qing held the teacup and looked around: "I Here are the drawings, the bow part needs to be remodeled a bit."

"Sir, don't you consider adding outboards, radios, and cockpits?" The sales girl looked at Ye Qing with pitiful eyes: "We have five types of yachts that can be choice, all of which are made of glass fiber reinforced plastic with resin coating. Layer."

"I only need a hull, you can make it in a few days at the earliest."

"It can be built in two days. We have FRP braided device imported from Germany. The fiber density of the manufactured hull is guaranteed to be 30 higher than ordinary."

Disappointment is disappointment, and the list has to continue.

When paying by credit card, this girl who was about the same age as Ye Qing almost fell into Ye Qing's credit card.

"First... Sir, can you leave an address. When the hull is built, our worker will be delivered to the door."

There is also a ‘door’ delivery service?

Ye Qing was secretly happy, and wrote down the address and contact number with a brush.

Buy the hull, Ye Qing returned to Dragon Creek Beach and continued the manufacturing of device for the treatment of industrial wastewater with strong ionization.

As a result, at half past five, Ye Qing's phone rang.

An unfamiliar number, but the voice is not unfamiliar, that is the ‘female’ salesperson from Red Star Shipyard.

On the phone, her voice was very gentle, asking Ye Qing if she was free tonight?

She said that she wanted to go to the bar for a drink, but she didn't have any friends around. She just met Ye Qing in the afternoon and felt ‘quite’ in love.

"I'm sorry, you are not the type I like." At this moment, Metal Specialist, powder metallurgy, is the most critical step of casting embryos. How could Ye Qing go on a date with a girl who doesn't suit his eyes?

This refusal was direct and hurtful enough, and the girl was stunned for seven or eight seconds.

"You...you...the hull will not be delivered. You can find a car and tow it."

"Whatever." Ye Qing hung up with a smile.

powder metallurgy, this is the metallurgy technology that sounds very tall.

Many people are unfamiliar with this technology. Isn't metal smelted like molten iron?

How to smelt with powder?

Like ceramics, metal alloy powder is used to die-cast embryos into a finished shape, and then sent into a high-temperature furnace to be fired like ceramics.

This technology was first used to make metal that is difficult to melt, such as tungsten filaments in light bulbs.

Among all kinds of metal, tungsten is the most difficult to melt and volatilize metal. Its melting point is high, so people have a whim, milling tungsten into powder, and adding catalyst, aluminum silicon and thorium oxide.

In this way, there is no need to boil it to the degree, only 1500 degrees can be fired into qualified tungsten wire.

And powder metallurgy has an advantage, — — is formed in one piece.

Often the processing of hard alloy can make engineers embarrassed.

The high-hard alloy is also an excellent material for making gears. It has good wear resistance and damage resistance.

By grinding ~IndoMTL.com~, the alloy powder that is ‘mixed’ uniformly is forged into qualified embryos, and then sent for firing, you can get a processing gear without any lathe ‘bed’.

Of course, the principle of ~ powder alloy is simple, but in the actual forging process, the requirements for industrial technology are very high, especially the high-precision molds used to forge embryos.

The mold design is unreasonable. The embryos that are forged by the press will have uneven internal mechanisms, and only burnt out products that are vain.

Similarly, powder metallurgy can be used to burn metal or nonmetal.

Metal Specialist is now playing with nonmetal firing, using graphite and ceramic powder as the main material, Diamond powder as the binder,'mixing' a certain proportion of solvent oil and wine'jing', and using the just made'mix The material machine makes irregular rotating motions and is mixed and milled, and finally through metal smelting center, it is forged into the shell embryo of the magnetic generator.

The greater the forging pressure, the stronger the material will be.

The forging pressure of metal smelting center is 10,000 tons. This data has exceeded that of the powder metallurgy enterprises that have a lot of votes. But Metal Specialist disdainfully said that forging pressure of 100,000 tons can be regarded as the last "good!";