Monster Factory Chapter 232: : Super-hard alloy

(Today is the last day of July. First of all, thanks Yunyang i became the leader of the book. Also, if you don’t vote, it will be wasted!)

……………………

At three in the morning, the official website resumed.

The notice issued by the hacker was naturally deleted, and the notice was reissued, saying that the previous official website was maliciously tampered with.

After the website was opened, some night owls who had taken the screenshot were discussing this matter.

They all believed that the official website of Monster Heavy Industry was hacked. They are pure feeling, and confidence in Monster Heavy Industry.

This also makes them extremely rare, and they have all spoken to speculate about where the hacker is doing the trick.

Some people speculate that it is a foreign hacker group. Because of the rise of Monster Heavy Industry, it is not domestic companies that threaten the most, but the old brand Company, which accounts for the share of worldwide's cutting-edge industrial manufacturing.

Some people also speculate that some hackers saw that Monster Heavy Industry made too much profit for terrifying, so they attacked the official website to blackmail money.

There are many similar examples. Almost all emerging network platforms have had the experience of being blackmailed by hackers, and even the ordinary masses have not been able to escape.

Due to IOS vulnerabilities in the first half of the year, some customer(s) opened cell phone and found that cell phone has been banned. Hackers’ contact information appeared directly in the prompt even more arrogantly. After paying a certain amount of money, cell phone of customer(s) will be restored. .

The truth is still a mystery.

The next day, Ji Ke, who hadn't slept all night, took all the staff from the network department to busy setting up the backup server, and completely formatted all the computers in the Company.

The host responsible for the maintenance of the official website was replaced with an independent IP, independent networking, and the employee 20 was on duty for four hours.

The operating room is also being remodeled. It is directly physically isolated and not connected to any network.

Only ghosts can invade!

The electronic network is precisely Ye Qing's shortcoming. Fortunately, Company only has an official website to maintain.

When the hacker invaded Company, only two hosts were running in Company. One is the host responsible for the maintenance of the official website, and the other is the operating room control host.

There is no important information in the two hosts, so Company did not cause much loss.

Dragon Creek Beach, Factory, also needs a complete transformation of the network.

The Internet here is basically undefended, and Ye Qing uses it to watch TV and browse the web all day long. Back to Dragon Creek Beach, the first thing Ye Qing did was to unplug the router directly.

All computers involved in industrial production are physically isolated.

Especially the large-capacity host used to store huge volume drawings. Ye Qing even removed the network card.

After using the computer, we must strictly distinguish them. Entertainment belongs to entertainment, and office belongs to office.

After finishing all this, it was already afternoon, and there was no news of hackers continuing to invade from Ji Ke.

If love comes or not, Ye Qing didn't open the network Game Company, so where would he focus on the network?

Industrial manufacturing is the focus.

In the underground base, the Microwave Sintering Furnace has been manufactured by Master Craftsman. Metal Specialist is standing in front of the workbench, blending Super-hard alloy according to the formula.

Tungsten, cobalt, tantalum, titanium, nickel, five kinds of metal components, which are adjusted in proportion.

Ye Qing asked Metal Specialist to mix 50 kilograms of metal powder first, then sent it to the forging press and forged it into a 2X2 square sintering piece.

sintering pieces were sent into Microwave Sintering Furnace, Metal Specialist said nothing, walked to the sintering furnace that can accommodate a car, and set the temperature at 1455 degrees.

This temperature is exactly the melting point of nickel among the five metals.

sintering super hard alloy has very complicated steps, and the first step is the difficult liquid phase sintering in powder metallurgy.

Compared with traditional smelting technology, powder metallurgy has a larger defect that the pore size of — — material is too large.

Because in the sintering process, metal cannot be melted like a steel furnace.

It is powdered metal die-casting, once it melts and deforms, it becomes scrap.

Liquid phase sintering can solve this technical defect, according to the different principle of metal melting point. metal with a lower melting point is mixed into powdered metal, so that the low melting point metal evenly distributed inside the sintering part will start to melt and penetrate into the void of the sintering part.

After setting the temperature, Ye Qing heard a hum, and the entire sintering furnace began to vibrate slightly.

Ye Qing retreated to eight feet away.

It is said that microwave ovens have radiation. This thing in front of me is a hundred times stronger than microwave ovens in terms of size and power. God knows if there is radiation.

In the furnace, the internal structure of Super-hard alloy began to change. The content of 8% silver-white nickel powder slowly becomes liquid.

Five minutes later, the temperature was increased forty degrees.

This is the melting point of metal cobalt. When metal cobalt also turns into a liquid state, Metal Specialist opens Microwave Sintering Furnace and takes out the semi-finished product that has become pitch-black.

He didn't need any tools, so he took them out with his hands covered in black insulating armor.

Isolation armor can insulate heat. Metal Specialist puts semi-finished hard alloy into a carburizing medium heated to 900 degrees for carburizing.

Carburizing treatment can make metal obtain higher hardness and wear resistance.

There are several steps of reheating, quenching, and low temperature tempering.

When a piece of metal board, which is as black as inked ink and has a fine grainy texture on the surface, appeared in front of Ye Qing, one and a half hours had passed.

Ye Qing tapped the black metal lightly with a hammer, and the sound returned was "Punch ~", and Ye Qing's wrist was numb.

Ye Qing couldn't wait, and asked Juli Pegging to move the Super-hard alloy out of the Factory, and then got into the cockpit of Colossus Type I to test how hard it really is.

On the mechanical arm of Colossus Type I, a breaker and cutting gear are locked. Ye Qing operated the breaker and attacked the Super-hard alloy lying on the ground.

"~, ~, ~"

As soon as the breaking hammer touched this piece of Super-hard alloy, Ye Qing’s ears followed with thunder ~IndoMTL.com~The cone-shaped breaking hammer head, every time it touches, it splashes dazzling sparks.

The ground also vibrated with ~ and ~. The breaking hammer can easily crush the large rocks of the grinding disc, but it cannot leave marks on this Super-hard alloy plate.

The impact lasted for more than seventy times, and the rocks on the ground were shaken into floss.

But Ye Qing jumped out of the car and checked and found that there was only a dent on the surface of the Super-hard alloy.

On the contrary, the hammer is also made of alloy material, and the sharp tip of the hammer is even flattened.

Change to a cutting gear, the sparks are the same as opening the floodgate to release water. When the cutting gear is abruptly ground off all the serrations, there is only a shallow cutting trace on the surface of the Super-hard.

The scene before him made Ye Qing unable to speak with his mouth wide open.

He knows the power of Colossus Type I best, but it seems that even if one hour later, it is impossible to completely destroy this Super-hard alloy plate. (To be continued.)