Monster Factory Chapter 808: : Synthesis of Exceed Grade material


Welcome your visit, please remember the address of this site: cell phone reading, so that you can read the latest chapters of the novel "Exceed Grade Monster Factory" at any time...

Exceed Grade Bio-synthetic Material?

This seems to be very promising in special industries. In the civilian market, Ye Qing is not easy to judge, because just looking at the information introduction, you know that the synthetic price of this material must not be cheap.

Superconducting Metal can only be used for personal use temporarily. Exquisite Aircraft is restricted by strict domestic air control regulations and cannot be promoted in the domestic market. The bionic compound-eyes webcam is currently most suitable for the second generation Illusory Crystal cell phone.

Look at it this way...

It seems to count, really only the Liquid Printer drawn by the first Lottery, which is more suitable as the new product release.

"No, any new technology has an infinite market space."

"We merely lack the creative thinking to discover their uses." In the office, Ye Qing silently knocked on his forehead to teach the monsters. "In 1930, USA DuPont Company synthesized man-made fibers in the laboratory for the first time. In four years, this man-made fiber upgrade has been turned into a lightweight and wear-resistant material."

"Nine years later, this man-made fiber named'nylon' began mass production, and it became an indispensable nylon product in the industry, and nylon stockings that made women crazy. Then DuPont Company became worldwide’s largest chemical company."

"We now have Exceed Grade Bio-synthetic Material, Liquid Printer, and superconductor technology. There is no reason to make worldwide people crazy products."

Ye Qing did not believe in this evil, and continued to add to the monsters: "Food, clothing, housing and transportation. This is a topic that worldwide humans will never be able to leave. It is also the largest category of economic systems in the civilian market. 21st Century, human living standards have improved, and yet I want to add a word "play"."

"Food, clothing, shelter, transportation and play, we don’t touch this piece of food. We are left with this what time. By the way, there is medical and health care."

"Let's think of a way to develop a product around this what time."

"Boss, new products are easy to develop, but what you want is an innovative product that can sweep worldwide."

"Even if I have an IQ comparable to Einstein, I can't figure it out within ten and a half months." The opposite Electric Crystal made a brainstorming action. If only new products are mentioned, the market potential is not considered. , Then Electric Crystal can come up with a thousand kinds.

"You guys, iron bumps in your head." Ye Qing sighed with hatred for iron failure. They are monsters, and their way of thinking may be different from that of humans.

"Let’s do this, first make samples of Liquid Printer, Biological Fiber Material, and compound-eyes webcam. Let me see what is so special about these two Black Techs. Then we can design new products based on the samples." /

"Superconducting Metal, and Exquisite Aircraft will put Second Echelon first."

"The meeting is over!"

……

At four o'clock in the morning, the hard-working monsters immediately started with the latest Black Tech drawings.

Liquid Printer is in charge of Master Craftsman, which can print special liquid materials into device of solid products in any shape within the size. Its industrial technology is not too complicated, at least in the eyes of Master Craftsman.

try{mad1(gad2;}h(ex){}   It has three sets of sizes, distinguished by the printing space of the workbench.

The first type can print up to 30 cubic centimeters, the second type is one cubic meter, and the third type is five cubic meters. The last one is obviously for industrial use, so Master Craftsman, choice is the second.

Its core components are two high precision nozzles.

For ordinary3d printer, the material nozzle is actually a simple three-coordinate processing head, which consists of a horizontal movement axis, a longitudinal movement axis, and an up and down movement axis. This processing head is more common in the industrial processing field than the Photo Cheat beauty on the Internet.

The nozzle is a 3D printer, and the drill is an engraving machine, or a CNC milling machine.

The technical difficulty is zero. Ye Qing can build a guide rail by himself without reading any instructions. Even some family-style workshops can assemble and produce.

However, the material nozzle of Liquid Printer is five coordinates.

five coordinates material nozzle is the core spindle processing head of the five-axis linkage machine tools. A five-axis linkage machine tools has only one processing head, which can processing various complex curved surfaces, which is the "Crown" grade device in the industrial processing. Even today, China is still unable to gain a foothold in the field of five-axis linkage machine tools.

There are now more than 600 Five-axis Processing Centers in the Dragon Creek Beach underground base, all of them are foreign brands.

Is it difficult to make an Five-axis Processing Center the size of a computer desk?

Is it difficult to install a processing head in the center of this suitcase-sized processing to make it a dual five-axis linkage?

It's hard to go to heaven!

All five-axis machine tools spindles have a defect. It is to drive the main shaft of the processing head. When turning, it can only rotate 270 degrees at the maximum. This is an inevitable result of the mechanical structure design, just like humans cannot twist their necks 360 degrees.

However, complex curved surfaces are sometimes so complicated that the main axis needs to be rotated 360 degrees.

In the case that the main shaft cannot do this, the top processing centers can support the flipping of the fixture for the fixed parts, allowing the parts to change positions to achieve a 360-degree processing effect.

This fixture is flipped, like a double five-axis. But merely is similar, it should be called a two-axis nc workbench, and a more advanced one is called a three-axis multiple workbench.

As for the real five-axis linkage table, Ye Qing has only seen it in Dragon Creek Beach Factory.

Now Monster industry wants to manufacture a material nozzle with dual five-axis dual linkage in the device the size of the Standard computer desk. Even if Demaggi, who supplied the most processing centers in the underground base, and all the engineers of Yamazaki Mazak came, there was nothing to do.

With the drawings, Master Craftsman can come out processing according to the drawings.

Biological Fiber Material, combined with three special liquid materials of Liquid Printer, is completed by the material master, Master Craftsman and Metal Specialist.

There is no difficulty in the three liquid printing material formulas. With the production process, let alone the material master. Many top chemical companies outside can also synthesize it, so the formula must be strictly placed in Monster confidential.

try{mad1(gad2;}h(ex){}   But the complexity of Biological Fiber Material can make humans desperate!

Material masters use Spider Silk-like toughness and lightness to describe this Exceed Grade material.

But in nature, even the toughest Spider Silk spit out by black widow spiders has many fatal flaws. For example, it is very sticky, whether it is in natural evolution, in order to stick to the prey with a net, or the characteristics of Spider Silk itself, it is sticky anyway.

There is also a short life span. Spider Silk is a protein fiber. When exposed to the air, it will gradually lose its strength as the protein is decomposed.

Seventh Stage's Biological Fiber Material will certainly not have these defects, which means that it is several times more difficult than the current research on the popular synthetic Spider Silk technology.

The difficulty lies in the materials. These synthetic materials can actually be purchased from chemical companies and Bio-pharmaceutical Enterprise. The most expensive raw material used here is artificial protein.

Its difficulty is the same as Plasma Battery, it needs a Exceed Grade device.

high-energy ray mutagenizer.

This is a device composed of a super-strong magnetic field generation module and High-Purity radiation source. It can induce changes in biological genes in the belt synthesis material through a special frequency, and turn it into a protein synthetic fiber similar to Spider Silk.

The principle of device is somewhat similar to the currently popular space breeding technology and gene transcription technology. People use rockets to send seeds into space, allowing the high vacuum of space, high cosmic energy ion radiation, and cosmic magnetic field to irradiate the seeds to induce the seeds to mutate.

device is not technically difficult in theory, because the scientific and technological drawings of Monster Factory often echo the previous one layer.

Sixth Stage, Monster worker have already produced a strong magnetic field generator to synthesize monocrystal metal. Now radiation source can also be obtained from refine in uranium ore.

system automatic infusion operation system, so there is no need to worry about how to program to control these high-energy rays.

But the current situation is that the power of the magnetic field generator is not enough!

To make a magnetic field generator that meets the requirements, you must use superconductor metal...

Fortunately!

Fortunately, ~IndoMTL.com~Biological Fiber Material is divided into three quality levels.

The lowest Third Grade material, just simply modify the existing strong magnetic field generator and add another radiation source.

Now Factory is secretly using refine weapon-grade concentrated uranium to be used as fuel rods for the humpback whale.

Only need to re-manufacture a set of containers and put High-Purity pellets as required to serve as radiation source. Therefore, the first to be manufactured is the lowest grade Biological Fiber Material.

The next day.

Ye Qing suspends notifying Company of new product content. Subsequently, Company Purchasing Department, a large-scale Bio-pharmaceutical Company from Shanghai, purchased key raw materials.

In Factory, the strong magnetic field generator has been modified, and radiation source is also in place.

At seven o'clock that night, the material master sent the prepared synthetic raw material to the workbench, ready for the first synthesis.


Leave a Reply