Monster Factory Chapter 86: : Applause in the operating room
Shi Yuqing returned to the operating room, and asked Dr. Shi to wait a little longer for 20 minutes.
"It's really nonsense, you said it yourself, cutting machine(s) needs at least 5-6 hours to be cut." Another doctor stomped angrily: "If the time is delayed, if a medical accident occurs, who is responsible?"
"I believe him, he is a kind person." Shi Yuqing directly ignored the doctor's outrage(d).
Doctor Shi, the chief surgeon of , used an endoscope to observe the condition of An Si Nian's palms: "The girl's palms are all blue, I can only give it half an hour."
"Squadron leader, how many times have we done demolition and cutting, can we cut it, don’t we understand?" The other two firefighters hesitated. They were not afraid to take responsibility. merely looked at the little girl. Lying on the operating table is too painful, and the longer the delay, the easier it is for accidents.
"He said 20 minutes, we waited 20 minutes, as a hope for the little girl." Shi Yuqing believes in Ye Qing, because his car was printed with Cutting Machine Tool advertisements, it must be better than them in the cutting field. The staff should be more professional.
Just seventeen minutes after the electronic clock on the wall, there was a knock on the door of pēng pēng outside the operating room.
The little nurse pushed the door to look at. The young man had gone and returned, and he also pushed a device which looked very advanced and was somewhat like an anesthesia machine commonly used in operating rooms.
The little nurse can recognize this machine even if she doesn't understand machinery, it's not the so-called cutting machine(s).
It was too late to implement strict disinfection. The little nurse directly stuffed Ye Qing a surgical gown and mask.
Squadron leader Shi Yuqing and the two firefighters, their expressions of joy were suddenly frozen in shock. They quickly wiped their eyes and looked at the machine ignorantly.
This is a small but very complex machine. The bottom of the square is equipped with a reel. On the top is a component composed of eight hydraulic columns. On the top is a working platform with many black pipes that look very solid.
"Didn't you say that you want to cut with cutting machine(s)?" Even Shi Yuqing, who knows many cutting methods, opened his chin and looked at Ye Qing ignorantly.
"Who said I would use cutting machine(s)?" Ye Qing quickly pushed the machine to the operating table, and asked the little nurse to rush two buckets of water.
"y-yo-you ~, you don't need cutting machine(s), how do you cut it?" Another doctor's angry nose was crooked: "What are you, why do you have to take two buckets of water?"
Ye Qing ignored him and glanced at An Si-nian.
At this time, An Si-nian has closed her eyes, her expression is painful. Time has passed so long, she has no strength to open an eye opener.
The little nurse was busy fetching water, and Ye Qing pulled out the wire of this machine by herself.
"I'll give you some popular science. This machine device is called CNC ultra-high pressure water cutting machine(s)." Ye Qing plugged in the power supply and started the control panel: "Seeing that there is no multi-stage hydraulic column below, it can add water. Pressed to 380megapascal, it is shot through the nozzle on the workbench, and the water flow speed is three times that of a pistol bullet."
"Even if cutting machine(s) can cut stainless steel quickly, it will generate heat of immense. Water spray cooling can only lower the surface temperature. It needs to be cut for a while, which is a waste of time."
"The high-pressure water cutting machine(s) can achieve complete athermal work."
High pressure water cutting machine(s)……
Everyone is thoroughly dumbfounded. When several firefighters were engaged in Factory fire fighting knowledge training, they also saw a high-pressure water cutting machine(s) in Huaxing Heavy Industry. But the device, which can cut hard metal, looks very clumsy and very expensive.
Where is this one in front of you?
is so small that one person can move at will, and it’s no problem to put it in the back seat of a car.
, but the ultra-high pressure water cutting machine(s), the jet of water will definitely break through the stainless steel cylinder......
The water that can penetrate even stainless steel, what will happen if it is shot on a person?
The nurse quickly fetched two buckets of water. Ye Qing couldn't explain their doubts. After measuring the thickness of the stainless steel cylinder with a cursor jam, he quickly set the data on the control panel.
Yes!
If it is a traditional ultra-high CNC pressurized water cutting machine(s), it is almost impossible to cut the stainless steel with only shallow one layer without hurting the inside.
But Ye Qing’s small CNC water cutting machine(s) is different. This is the rare quality processing tools sold in the Tool Mall of Monster Factory.
It can automatically adjust the working pressure according to the cutting depth from sensor. Like an engraving machine, cut the desired thickness without any difference.
The height of the operating table can be adjusted. Ye Qing asked the nurse to adjust it to the same height as the water cutting machine(s) worktable, and then isolate the worktable with a surgical cloth to prevent water from splashing on Ansianian.
After adjusting the parameters, Ye Qing gently put Ansian's left hand, together with the stainless steel cylinder, on the workbench.
There was a slight motor rotation sound, and two fixing plates protruded from both sides of the worktable to firmly fix the stainless steel cylinder.
As Ye Qing presses the switch on the control panel, the ultra-high pressure water jet on the three-axis table slowly moves to the end of the center line of the stainless steel cylinder.
There is no tool test. With the multi-stage hydraulic column under the workbench, it moves a little bit, and the nozzle of the workbench "buzzes ~", ejecting a very thin water jet beyond the power of human imagination. .
The firefighters' eyes widened. In the face of this kind of high technology, they have completely lost their right to speak.
The doctors and nurses were also completely dumb. They could not imagine that the high-tech processing tools in the industry could be used to save people on the operating table even if they would perform surgery for another three lifetimes.
The noise of immense made several nurses cover their ears.
The scene in front of them made them unforgettable for a lifetime. The high-hardness stainless steel that even firemen did not dare to try, turned out to be not much harder than butter under the shooting of this high-speed water jet.
The water jet traverses a precise straight line, and fine drops of water splash around, leaving a deep cut groove.
The firefighters all mentioned their throats, their eyes fixed on the ultra-high pressure water stream, and they kept praying. The water stream whatever happens must not shot through the entire stainless steel wall.
Ye Qing didn't worry at all, because this rare quality water cutting machine(s) can automatically adjust the working pressure according to the cutting depth transmitted by sensor.
Doubt about its ability is equivalent to doubting the strength of Monster Factory.
The seemingly constant flow of water, in fact, the pressure range has been adjusted by CNC programming how many times during work.
Three minutes later, the first knife was completely completed by CNC water cutting machine(s). Several firefighters boldly walked forward and carefully observed the cutting depth with big eyes and small eyes.
hiss...
three times to draw air-conditioning, under the straight cutting dent, only the stainless steel wall of one layer paper thickness is connected to the two sides. This thickness is estimated to be torn apart directly by people who have a lot of energy.
The Armed Police and Special Police Forces have a very performance skill called the hand-to-wash basin.
The thickness of the stainless steel basin is much thicker than this.
Ye Qing adjusts the machine and prepares to cut the second knife.
There is no need for Ye Qing to speak out, everyone obediently stepped aside, watching Ye Qing with eyes that both worship and admire.
A few little nurses are almost silly, they think this young and golden man ~ IndoMTL.com~ has an attractiveness for people to fall into.
A violent "buzz ~ buzz ~" cutting sound of water jets broke their imagination.
Three minutes later, the second cutting dent was cut out. After Ye Qing pushed the water cutting machine(s), the already eager firefighters rushed over immediately.
The two pliers clamped the stainless steel cylinder, and they didn't feel any effort. The stainless steel cylinder was pulled apart with a scream.
It may be that the oppression of immense suddenly disappeared, and An Si Nian's bruised left hand also moved unconsciously.
There is a wound on her palm. It is estimated that the wound is not deep, and the bleeding has stopped at this time.
There are abrasions on the back of the hand and fingers, and laymen know it is not serious.
took off the winch that was pressing on her hand, Dr. Shi carefully squeezed the bones of her palms and fingers, and said in surprise: "Great, none of the bones are broken. Take a CT scan immediately and see No bone fractures."
"Papa ~" A young nurse clapped her hands excitedly and looked at Ye Qing like Hero.
"Pap Pap ~ Pap Pap ~" in joy, the rest of the doctors and firefighters slapped their hands excitedly and cast their admiring eyes at Ye Qing.
"I apologize for my stupid behavior." The doctor who was always worried about causing a medical accident and affecting his own future stepped forward, a little ashamed: "Today you gave me a good lesson, what is technology !"
"I want to apologize too." A firefighter stepped forward: "Before I was saying you are stupid in my heart. I pushed a ghost stuff in."
"I’m convinced, I’ve never known that the cutting operation can be advanced like this~IndoMTL.com~Book friends are welcome to visit and read. The latest, fastest and hottest serial works are all in~IndoMTL. com~cell phone customer(s), please go to read.